Name
sg_rtpg - send SCSI REPORT TARGET PORT GROUPS commandSynopsis
sg_rtpg [--decode] [--help] [--hex] [--raw] [--readonly] [--verbose] [--version] DEVICEDescription
Send a SCSI REPORT TARGET PORT GROUPS command to DEVICE and outputs the response.
Target port group access is described in SPC-3 and SPC-4 found at www.t10.org . The most recent draft of SPC-4 is revision 37 in which target port groups are described in section 5.15 .
Options
Arguments to long options are mandatory for short options as well.-d, --decode decodes the status code and asymmetric access state from each target port group descriptor returned. The default action is not to decode these values.
-e, --extended use extended header format for parameter data. This sets the PARAMETER DATA FORMAT field in the cdb to 1.
-h, --help output the usage message then exit.
-H, --hex output response in hex (rather than partially or fully decode it).
-r, --raw output response in binary to stdout.
-R, --readonly open the DEVICE read-only (e.g. in Unix with the O_RDONLY flag). The default is to open it read-write.
-v, --verbose increase the level of verbosity, (i.e. debug output).
-V, --version print the version string and then exit.